Max Hydraulics

These are variable displacement single vane pumps with motor. They come with inbuilt pressure compensator and flow cut off, which in turn give good power saving. This series pump is widely used for machine tools.

Additional Information:

• Delivery Time: 1 TO 2 DAYS

The general mode of operation will be explained at the movement of one pumping piston by means of picture 1:
The outer ring for bracing of the pumping pistons is in eccentric position to the hollow shaft in the center. This eccentricity determines the stroke of the pumping piston.

The piston starts in the inner dead center (IDC) with suction process. After a rotation angle of 180° it is finished and the workspace of the piston is filled with the moved medium. The piston is now in the outer dead center (ODC). From this point on the piston displaces the previously sucked medium in the pressure channel of the pump.

Additional Information:

• Production Capacity: 5 pcs.
• Delivery Time: 2-3 Days

Fixed-displacement pumps can be selected for use as long as the following conditions don’t need to be met:
• maintains system pressure on a stalled actuator
• during operation of the cycle, the actuator must be operated at
relatively low speeds
• circuit operates at varies speed ranges
• the pump is unable to unload by the circuit

Additional Information:

• Delivery Time: 1-2 DAYS

Vane pumps are hydraulic pumps that operate at very low noise levels. Hydraulic vane pumps operate with much lower flow pulsation, i.e. constant flow.

Additional Information:

• Delivery Time: 1-2 DAYS